Forum: WHALER
  ContinuousWave
  Whaler
  Moderated Discussion Areas
  ContinuousWave: Whaler Repairs/Mods
  Blistering in Gelcoat

Post New Topic  Post Reply
search | FAQ | profile | register | author help

Author Topic:   Blistering in Gelcoat
JDM posted 08-25-2001 07:19 AM ET (US)   Profile for JDM   Send Email to JDM  
Let me try this again. I am a new visitor.
I am on the verge of purchasing an '84 Outrage 22. The boat has been left in freshwater during the summer months and has developed an "orange peel" effect at and below the waterline. Whaler has suggested to sand, prime and paint the affected area. Do you agree? My intent is to keep it on the trailer after use. Your comments are appreciated.
Mark Gallagher posted 08-25-2001 08:30 AM ET (US)     Profile for Mark Gallagher  Send Email to Mark Gallagher     
I would have a local paint/fiberglass repair man look at the hull and give you a diagnosis and estimate. Glass work can be surprisingly expensive. This will also let you better estimate what you pay for this boat.

Mark

Post New Topic  Post Reply
Hop to:


Contact Us | RETURN to ContinuousWave Top Page

Powered by: Ultimate Bulletin Board, Freeware Version 2000
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.