Moderated Discussion Areas
  ContinuousWave: Whaler Repairs/Mods
  re Glassing 17 Whaler- Fibreglast

Post New Topic  Post Reply
search | FAQ | profile | register | author help

Author Topic:   re Glassing 17 Whaler- Fibreglast
weaverf posted 09-18-2001 12:23 PM ET (US)   Profile for weaverf   Send Email to weaverf  
I use fibreglast stuff but the biaxial mat mentioned in several past notes is not on their supply list on the web page. Is this something special ordered?? I am reglassing the hull from the inside, after removing the floor and foam, before adding stringers and I was thinking about 3/4 oz chopped strand mat with two layers of the Bi-directional E-Glass, #1094 / 2x2 twill weave over the mat. Then glass the stringers in. Should I use any mat? find the Biaxial mat? or add more layers of the E glass? Any info from your experience is helpful

Post New Topic  Post Reply
Hop to:

Contact Us | RETURN to ContinuousWave Top Page

Powered by: Ultimate Bulletin Board, Freeware Version 2000
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.