Forum: WHALER
  ContinuousWave
  Whaler
  Moderated Discussion Areas
  ContinuousWave: Whaler Repairs/Mods
  16' Bow Light Wire

Post New Topic  Post Reply
search | FAQ | profile | register | author help

Author Topic:   16' Bow Light Wire
dacomb posted 09-19-2001 09:20 AM ET (US)   Profile for dacomb   Send Email to dacomb  
I have a 1965 16' and the original wire to my bow light has now gotten to short. Is there anyway to run a wire to replace this one or is it embedded in the hull? Also, I read in another section about an original replacement rub rail, does it really only cost $100.00 and is easy to install?
Taylor posted 09-19-2001 06:27 PM ET (US)     Profile for Taylor  Send Email to Taylor     
see http://continuouswave.com/whaler/reference/rubRail.html
Taylor posted 09-19-2001 06:30 PM ET (US)     Profile for Taylor  Send Email to Taylor     
It sounds straightfoward if not easy. And with detailed instructions like that...

Post New Topic  Post Reply
Hop to:


Contact Us | RETURN to ContinuousWave Top Page

Powered by: Ultimate Bulletin Board, Freeware Version 2000
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.