Forum: WHALER
  ContinuousWave
  Whaler
  Moderated Discussion Areas
  ContinuousWave: Whaler Repairs/Mods
  Salvage Whaler ???

Post New Topic  Post Reply
search | FAQ | profile | register | author help

Author Topic:   Salvage Whaler ???
JAC posted 09-21-2001 03:12 PM ET (US)   Profile for JAC   Send Email to JAC  
Does anyone have or know of a 22' hull that is trashed ? I have a large hole to repair in the bottom of mine and would like to cut the piece I need from a salvage hull rather than try to reconstuct from scratch.
The section I need is approx. 5'long X 2'wide, located on the right side, from the keel to the second chine. This includes the first chine from its square end at the rear to a point 4.5' foreward.
If you all have any leads or advice, it would be greatly appriciated.
Thanks,Jim
george nagy posted 09-21-2001 05:37 PM ET (US)     Profile for george nagy  Send Email to george nagy     
I know there is a guy in hawaii that has a commercial 22' in bad shape.

Post New Topic  Post Reply
Hop to:


Contact Us | RETURN to ContinuousWave Top Page

Powered by: Ultimate Bulletin Board, Freeware Version 2000
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.