Forum: WHALER
  ContinuousWave
  Whaler
  Moderated Discussion Areas
  ContinuousWave: Whaler Repairs/Mods
  Gel Coat Questions

Post New Topic  Post Reply
search | FAQ | profile | register | author help

Author Topic:   Gel Coat Questions
joem posted 10-16-2001 10:32 PM ET (US)   Profile for joem   Send Email to joem  
I have 2 questions they are.

1. When doing the interior gel coat do a lot of people do the gunnels down to the screws of the floor sand as much as they can and paint the floor. I really can't see me being able to keep the non skid floor unless I do this.

2. While the engine is off I am doing the interior and exterior should I drill holes in the bottom to see if their is any water in the hull and let it drain? If so how many holes and were should they be drilled and.

joem

Post New Topic  Post Reply
Hop to:


Contact Us | RETURN to ContinuousWave Top Page

Powered by: Ultimate Bulletin Board, Freeware Version 2000
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.