Moderated Discussion Areas
  ContinuousWave: Whaler Repairs/Mods
  Bow mount trolling motor on a 2002 13' sport

Post New Topic  Post Reply
search | FAQ | profile | register | author help

Author Topic:   Bow mount trolling motor on a 2002 13' sport
Seattlerocket posted 10-22-2001 05:44 PM ET (US)   Profile for Seattlerocket   Send Email to Seattlerocket  
Has any one done this yet on this new model 13' sport? Should it even be attempted?
Any tips for drilling into the “Whalerboard” up front?
Dick posted 10-22-2001 10:39 PM ET (US)     Profile for Dick  Send Email to Dick     
I did it on my 99 Montauk. The step pads on you boat are a little smaller and you may have to design a mounting plate to extend them to fit the base of the trolling motor. It can be done.

Post New Topic  Post Reply
Hop to:

Contact Us | RETURN to ContinuousWave Top Page

Powered by: Ultimate Bulletin Board, Freeware Version 2000
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.