Moderated Discussion Areas
  ContinuousWave: Whaler Repairs/Mods
  1989 22ft. revenge rubrail replacement

Post New Topic  Post Reply
search | FAQ | profile | register | author help

Author Topic:   1989 22ft. revenge rubrail replacement
csj posted 11-22-2001 06:05 PM ET (US)   Profile for csj   Send Email to csj  
just purchased a 89 22ft. revenge the rubrail has some bifs and i would like to replace it . please let me know my best avenue for this, and price. also looking for a trailer
jimh posted 11-23-2001 12:55 PM ET (US)     Profile for jimh  Send Email to jimh     
Please review this article:

If the article leaves you with unanswered questions, please follow up in this message thread.

By the way, your posting prompted me to add some new information to the article, another dealer with rub rails in stock and glad to sell them to owners of older Whalers.

larimore posted 11-26-2001 10:38 PM ET (US)     Profile for larimore  Send Email to larimore     
I looked into replacing it.
It is only available from OEM dealers in 22' lengths.
I decieded not to replace mine until and if it becomes absolutly necessary. I used epoxy to fix the major bashes in the PVC portion on the corners. Clean cracks in the sides, I live with. Where it come loose, I use pop rivits. Sounds bad - But actually no problem. I doubt I will ever need to replace it.


Post New Topic  Post Reply
Hop to:

Contact Us | RETURN to ContinuousWave Top Page

Powered by: Ultimate Bulletin Board, Freeware Version 2000
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.