Forum: WHALER
  ContinuousWave
  Whaler
  Moderated Discussion Areas
  ContinuousWave: Whaler Repairs/Mods
  Tan rub rail insert?

Post New Topic  Post Reply
search | FAQ | profile | register | author help

Author Topic:   Tan rub rail insert?
JBCornwell posted 11-28-2001 09:33 AM ET (US)   Profile for JBCornwell   Send Email to JBCornwell  
I bought over 100' of tan rubrail insert for pocket change. How serious of an offense would it be to put it on my OR-18 and Montauk? Both are teak trimmed boats and I thought it might complement the teak.

Opinions? (No hitting, please.)

Red sky at night.. .
JB :)

Bigshot posted 11-28-2001 09:52 AM ET (US)     Profile for Bigshot  Send Email to Bigshot     
I think it would look nice. Much better than the teal they used a few years back. Will get dirty real quick compared to the black. If you decide against it, let me know how much for enough to do my Montauk. My black is kinda crappy, I was gonna do red.
JBCornwell posted 11-28-2001 12:20 PM ET (US)     Profile for JBCornwell  Send Email to JBCornwell     
Let me know linear requirement, Bigshot.

I figure this stuff must be worth $10 a foot, but for you, shipping.

Red sky at night. . .
JB :)

Bigshot posted 11-28-2001 12:50 PM ET (US)     Profile for Bigshot  Send Email to Bigshot     
Thanks JB, I'll let you know later. I guess it is about the same footage as your Montauk:)

Post New Topic  Post Reply
Hop to:


Contact Us | RETURN to ContinuousWave Top Page

Powered by: Ultimate Bulletin Board, Freeware Version 2000
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.