Forum: WHALER
  ContinuousWave
  Whaler
  Moderated Discussion Areas
  ContinuousWave: Whaler Repairs/Mods
  Repairing screw holes in console gelcoat

Post New Topic  Post Reply
search | FAQ | profile | register | author help

Author Topic:   Repairing screw holes in console gelcoat
Eagleman posted 01-27-2002 09:24 AM ET (US)   Profile for Eagleman   Send Email to Eagleman  
I've looked through the previous posting for doing repair work. It appears that the best way to repair small existing screw holes both veritcal and horizontal in an 1984 console involves using Spectrum's gelcoat paste. Start by beveling the existing hole, fill with gelcoat paste and sand to desired finish. This is one of my next projects and would appreciate a confirmation on my assumption. Thanks
kingfish posted 01-27-2002 02:18 PM ET (US)     Profile for kingfish  Send Email to kingfish     
Eagleman-

See:
[url]http://continuouswave.com/ubb/Forum3/HTML/000001.html[/url}

kingfish

kingfish posted 01-27-2002 02:19 PM ET (US)     Profile for kingfish  Send Email to kingfish     
Oops-

http://continuouswave.com/ubb/Forum3/HTML/000001.html

Eagleman posted 01-28-2002 10:47 AM ET (US)     Profile for Eagleman  Send Email to Eagleman     
Kingfish,
Great information, will start when the weather warms up.
Thanks,
Eagleman

Post New Topic  Post Reply
Hop to:


Contact Us | RETURN to ContinuousWave Top Page

Powered by: Ultimate Bulletin Board, Freeware Version 2000
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.