Forum: WHALER
  ContinuousWave
  Whaler
  Moderated Discussion Areas
  ContinuousWave: Whaler Repairs/Mods
  OB Mounting Plate in Spashwell

Post New Topic  Post Reply
search | FAQ | profile | register | author help

Author Topic:   OB Mounting Plate in Spashwell
kamml posted 01-27-2002 04:50 PM ET (US)   Profile for kamml   Send Email to kamml  
My neighbor, an avid bass boat guy, (new 300HP Merc on 21'Renegade) looked at my new 90 Merc/Montauk installation and commented that I needed a plate to go across the upper transom motor bolts on the inside. I have seen these installed and they had BW logo. Is this really needed? What are they called? Where would I get one? Ken
Bigshot posted 01-28-2002 11:24 AM ET (US)     Profile for Bigshot  Send Email to Bigshot     
Not needed at all, but mine looks cool. About $20.
seagull posted 01-28-2002 03:22 PM ET (US)     Profile for seagull  Send Email to seagull     
This is what your looking for.

http://www.vancemfg.com/catalog3.html

Post New Topic  Post Reply
Hop to:


Contact Us | RETURN to ContinuousWave Top Page

Powered by: Ultimate Bulletin Board, Freeware Version 2000
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.