Forum: WHALER
  ContinuousWave
  Whaler
  Moderated Discussion Areas
  ContinuousWave: Whaler Repairs/Mods
  cowling insulation

Post New Topic  Post Reply
search | FAQ | profile | register | author help

Author Topic:   cowling insulation
whaler 5 posted 02-04-2002 08:51 PM ET (US)   Profile for whaler 5   Send Email to whaler 5  
Any ideas on material and procedure for replacing old deteriorated cowling foam insulation?
Bigshot posted 02-05-2002 10:35 AM ET (US)     Profile for Bigshot  Send Email to Bigshot     
Just pull it all out. If it breaks lose it can clog your carb and poof!
hauptjm posted 02-05-2002 10:56 AM ET (US)     Profile for hauptjm    
All of the manufacturers sell replacement insulation. Check your local dealer.
JLL posted 02-05-2002 07:02 PM ET (US)     Profile for JLL  Send Email to JLL     
Stuff available at BoatUS. From company called "Peace and Quiet". Kit comes with foam faced with foil and spray on adhesive. I used it on my '80 Johnson 100HP on my Montauk. Worked great. Motor was also quieter.
JLL posted 02-05-2002 07:10 PM ET (US)     Profile for JLL  Send Email to JLL     
Here is website for Cowling material

http://www1.shore.net/~dobquiet/

Post New Topic  Post Reply
Hop to:


Contact Us | RETURN to ContinuousWave Top Page

Powered by: Ultimate Bulletin Board, Freeware Version 2000
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.