Moderated Discussion Areas
  ContinuousWave: Whaler Repairs/Mods
  replacing wiring and hose covers

Post New Topic  Post Reply
search | FAQ | profile | register | author help

Author Topic:   replacing wiring and hose covers
will posted 02-06-2002 08:57 AM ET (US)   Profile for will  
The panels that cover the wiring on the starboard side and the fuel hose on the port side of my 1991 '19 Outrage are torn up. The previous owner cut holes in them to mount speakers. I am considering replacing them with off-white plexi-glass. Does this sound like a good idea? I may put speakers in them is well and plexi-glass seems a little more sturdy and rigid. Thoughts? I have a guy that can make exact replicas of what what was there.
triblet posted 02-06-2002 10:42 AM ET (US)     Profile for triblet  Send Email to triblet     
I'd use Starboard rather than Plexi.


will posted 02-06-2002 01:51 PM ET (US)     Profile for will    
Chuck--the things I am talking about have a right angle and the guy I know can put a right angle in plexi. The alternative is to buy the original from BW but I am afraid to ask what they would cost. Can you work with starboard like you can with plexi?
DIVE 1 posted 02-06-2002 06:36 PM ET (US)     Profile for DIVE 1    
I think that I have a set from a 22'BW. If I can find them and you would like them, I would gladly send them to you. They are gray in color.
triblet posted 02-06-2002 06:58 PM ET (US)     Profile for triblet  Send Email to triblet     
Dunno whether you can do heat bend in
Starboard like in Plexi, but it would be
done the same way. Get a small sample of
Starboard ("Seaboard" from TAP is the same)
and have your buddy give it a try.


Post New Topic  Post Reply
Hop to:

Contact Us | RETURN to ContinuousWave Top Page

Powered by: Ultimate Bulletin Board, Freeware Version 2000
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.