Forum: WHALER
  ContinuousWave
  Whaler
  Moderated Discussion Areas
  ContinuousWave: Whaler Repairs/Mods
  '74 Outrage Rail Fitting Replacement

Post New Topic  Post Reply
search | FAQ | profile | register | author help

Author Topic:   '74 Outrage Rail Fitting Replacement
wmverry posted 02-09-2002 05:29 PM ET (US)   Profile for wmverry   Send Email to wmverry  
Some of my rail fittings(Tees) have started to disolve. I'm assuming the bow rail is on continuous piece, and that the sternmost bend (drop) is too tight a radius to slide new fittings over. I've never seen any attractive two piece replacements, so I guess I'm going to have to cut and splice the rail to get the new tees installed. Any ideas?
grandmufti posted 02-09-2002 10:45 PM ET (US)     Profile for grandmufti  Send Email to grandmufti     
http://continuouswave.com/ubb/Forum3/HTML/001182.html
Try this link.It should help.

Post New Topic  Post Reply
Hop to:


Contact Us | RETURN to ContinuousWave Top Page

Powered by: Ultimate Bulletin Board, Freeware Version 2000
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.