Forum: WHALER
  ContinuousWave
  Whaler
  Moderated Discussion Areas
  ContinuousWave: Whaler Repairs/Mods
  Hydraulic Steering(hard to turn)

Post New Topic  Post Reply
search | FAQ | profile | register | author help

Author Topic:   Hydraulic Steering(hard to turn)
Pat Smith posted 03-17-2002 04:41 PM ET (US)   Profile for Pat Smith   Send Email to Pat Smith  
Guys.hope you could help me.this past week I replaced the "mat-Tac" and painted the metal plates on the console(looks great!).In the process of removing the old mat-tac,I took the steering brace off that was attached to the center console and laid the steering housing inside the center console.The hydraulic housing inside the console was kepted intacked,so when i put it back together it was just a matter of attaching the brace and slipping the cover over it.But when I had everthing together,the steering was alot harder to turn.Is there a simple solution ot this?Hope I'm explaining this right!-Pat Smith

Post New Topic  Post Reply
Hop to:


Contact Us | RETURN to ContinuousWave Top Page

Powered by: Ultimate Bulletin Board, Freeware Version 2000
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.