Forum: WHALER
  ContinuousWave
  Whaler
  Moderated Discussion Areas
  ContinuousWave: Whaler Repairs/Mods
  Epoxy / Glass expert needed in S.E. Conn.

Post New Topic  Post Reply
search | FAQ | profile | register | author help

Author Topic:   Epoxy / Glass expert needed in S.E. Conn.
tlynch posted 04-02-2002 02:07 AM ET (US)   Profile for tlynch   Send Email to tlynch  
Hello All,

As I have said in previous posts the floor of my 1985 Outrage 18 has come delaminated in several places. I know how to repair it by drilling two holes in the deck and inserting epoxy into one hole until it comes out the other and then laying sand bags on the area and letting it dry. Although I feel that I could possibly do this correctly, I also know that I could seriously scr@w it up!

I decided to start by calling a dealer. I called Connors & O'Brien in Pawcatuck and they said "maybe in the fall". Well - I want to use my boat this summer and would like to fix it before hand!

Here is my problem - my trailer is not registered (and needs a bit of work to use for long distances) and I am in Stonington, CT. If anyone knows anyone who lives nearby and would like to earn good cash for some weekend work please let me know. I am going to go to a couple local boatyards - Dodsons (where I used to drive the launch) and Noank Shipyard - to see if anyone wants the work. I would rather go with someone who someone here recommended.

Also - is $25 an hour cash + materials a fair offer? I know that it is a lot cheaper than at a yard but the yard takes most of what you pay them.

Todd

todd@shifteight.com

Post New Topic  Post Reply
Hop to:


Contact Us | RETURN to ContinuousWave Top Page

Powered by: Ultimate Bulletin Board, Freeware Version 2000
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.