Forum: WHALER
  ContinuousWave
  Whaler
  Moderated Discussion Areas
  ContinuousWave: Whaler Repairs/Mods
  drilling for water?!

Post New Topic  Post Reply
search | FAQ | profile | register | author help

Author Topic:   drilling for water?!
Cpt Quint posted 04-16-2002 06:50 AM ET (US)   Profile for Cpt Quint   Send Email to Cpt Quint  
I went back about 6 months/a couple of references to guys wanting to drill into thier boats to see if water came out.
I wonder a couple of things. Where did they drill?, at the base of the transom (around the factory drain hole) or underneath up into the bottom of the hull.
How much actualy came out and what was the basis for deciding to put a hole in the boat in the first place? (did vessel moor heavly or was there more physical evidence)
Finally was a permanent repair to the hole made or a cap type screw access attempted so it could be reopened in the future to allow dry season storage drainage.
Is this activity coming from physical signs that there is water, or is the forum making me too perinoid about my 39 year old unsinkable legend.

Post New Topic  Post Reply
Hop to:


Contact Us | RETURN to ContinuousWave Top Page

Powered by: Ultimate Bulletin Board, Freeware Version 2000
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.