Moderated Discussion Areas
  ContinuousWave: Whaler Repairs/Mods
  Painting Engine Bracket with Anti-fouling

Post New Topic  Post Reply
search | FAQ | profile | register | author help

Author Topic:   Painting Engine Bracket with Anti-fouling
Soho posted 05-07-2002 07:14 AM ET (US)   Profile for Soho   Send Email to Soho  
What do people generally do to antifoul the part of the engine bracket that is in the water. My configuration is a 69 Nauset with a 90 Yamaha in salt water. Is there a special paint to use, can I use what I am putting on the bottom, or is it best left bare ?
( Won't paint the zinc ! )



daverdla posted 05-07-2002 07:51 AM ET (US)     Profile for daverdla  Send Email to daverdla     
I had mine done with a spray-on clear antifouling paint. I've seen many boats where the bottom and the bracket were painted with the same bottom paint. It typically looks terrible. You may be able to get an anti fouling paint that matches your bracket but I doubt it.

Post New Topic  Post Reply
Hop to:

Contact Us | RETURN to ContinuousWave Top Page

Powered by: Ultimate Bulletin Board, Freeware Version 2000
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.