Moderated Discussion Areas
  ContinuousWave: Whaler Repairs/Mods
  Rubrail 11' whaler

Post New Topic  Post Reply
search | FAQ | profile | register | author help

Author Topic:   Rubrail 11' whaler
BrettDD posted 05-16-2002 03:08 AM ET (US)   Profile for BrettDD   Send Email to BrettDD  
I am sure there is a big article on this fine site somewhere, but Im a gonna ask anyways. Where can I find (and an approximate cost) the rubrail for an 11' BW???
Tom W Clark posted 05-16-2002 10:00 AM ET (US)     Profile for Tom W Clark  Send Email to Tom W Clark     
The rub rail kit is available from any Whaler dealer.
Adker posted 05-16-2002 10:02 AM ET (US)     Profile for Adker  Send Email to Adker     
I replaced the rub rail on my 1989 11' SS last summer. Whaler still makes and sells this rubrail. Available at your local Whaler dealer. I beleive I paid ~$125.

I replaced mine with rivets, as it was originally installed, but some replace it with screws in case it ever needs to come off again.

Not that difficult a project. Good Luck!

Ger posted 05-16-2002 05:48 PM ET (US)     Profile for Ger  Send Email to Ger     
I just replaced my rub rail on my 16 foot Katama. It cost me $140 from local Whaler dealer. If you want some tips on installation, email me, I'll be glad to tell you what I learned from experience.

Post New Topic  Post Reply
Hop to:

Contact Us | RETURN to ContinuousWave Top Page

Powered by: Ultimate Bulletin Board, Freeware Version 2000
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.