Moderated Discussion Areas
  ContinuousWave: Whaler Repairs/Mods
  Fuel line size?

Post New Topic  Post Reply
search | FAQ | profile | register | author help

Author Topic:   Fuel line size?
peteinsf posted 05-22-2002 10:54 PM ET (US)   Profile for peteinsf  
What in the I.D. size of fuel line that connects to the tank on a OR-25'? (I'd look but it's a 3 hour drive)

The Raider-18' looks like it was installed with 5/16" ID tank hose...


jimh posted 05-22-2002 11:56 PM ET (US)     Profile for jimh  Send Email to jimh     
On my 1987 20-REVENGE the 77-gallon tank fitting has a barb for 3/8-inch hose. Not the exact answer but a starting point.
peteinsf posted 05-23-2002 01:06 AM ET (US)     Profile for peteinsf    
Thanks Jim,

I started second guessing when I found the 5/16 in the raider...

My original guess was that it would be 3/8-inch. The 200HP outboard manual shows a 3/8 line comming in to the motor.

I was going to pick up a fuel filter but I didn't know what fittings to get.

lhg posted 05-28-2002 07:01 PM ET (US)     Profile for lhg    
The Whaler tank withdrawl fuel hoses were all 3/8" ID, even on the 18 Outrage.
peteinsf posted 05-29-2002 05:50 AM ET (US)     Profile for peteinsf    
Thanks Larry,

I double checked, the raider has two 5/16 hoses connected. I suspect it's custom since the boats were factory rigged with two 70HP motors. Also the tank does not have a fuel gage only a cap...

Post New Topic  Post Reply
Hop to:

Contact Us | RETURN to ContinuousWave Top Page

Powered by: Ultimate Bulletin Board, Freeware Version 2000
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.