Forum: WHALER
  ContinuousWave
  Whaler
  Moderated Discussion Areas
  ContinuousWave: Whaler Repairs/Mods
  Where can I get wood plugs to cover screws?

Post New Topic  Post Reply
search | FAQ | profile | register | author help

Author Topic:   Where can I get wood plugs to cover screws?
PULLNIT posted 05-27-2002 08:03 AM ET (US)   Profile for PULLNIT   Send Email to PULLNIT  
I lost a couple of the wood plugs that cover the screws on the gunwale of my 1988 18 outrage.Where can I get replacements?
Thanks John
Peter posted 05-27-2002 08:53 AM ET (US)     Profile for Peter  Send Email to Peter     
Any marine store like West or BoatUS should have teak plugs.
carlz posted 05-31-2002 09:55 PM ET (US)     Profile for carlz  Send Email to carlz     
You can make them youself with Veritas tapered snug plug cutter, www.leevalley.com,
http://www.leevalley.com/wood/page.asp?SID=&ccurrency=2&page=32320&category=1,180,42288

You must have a drill press, though

Steve Leone posted 05-31-2002 10:48 PM ET (US)     Profile for Steve Leone  Send Email to Steve Leone     
here is a great tip: S+S PLUGS, P.O. BOX 1188, WESTBROOK, ME 04092. they make just about every plug style in the universe. very inexpensive. most good hardware stores will carry at least a portion of thier line. happy trails (or wakes for that matter). steve out.

Post New Topic  Post Reply
Hop to:


Contact Us | RETURN to ContinuousWave Top Page

Powered by: Ultimate Bulletin Board, Freeware Version 2000
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.