Forum: WHALER
  ContinuousWave
  Whaler
  Moderated Discussion Areas
  ContinuousWave: Whaler Repairs/Mods
  Rear seat for a Nauset.

Post New Topic  Post Reply
search | FAQ | profile | register | author help

Author Topic:   Rear seat for a Nauset.
Ed Z posted 05-27-2002 11:46 AM ET (US)   Profile for Ed Z   Send Email to Ed Z  
I have a 1969 Nauset and am looking for plans for a rear seat like the one used in the Eastport model. Any have some advise.???
ChocLabWhaler posted 06-26-2002 12:44 PM ET (US)     Profile for ChocLabWhaler  Send Email to ChocLabWhaler     
Ed,
Did you ever have any luck finding a seat or the plans for one?
Thanks.
Whaler Proud posted 06-26-2002 01:12 PM ET (US)     Profile for Whaler Proud  Send Email to Whaler Proud     
Guys: Email your addresses to me. I have plans for a stern seat (Whaler) that was given to me from a member on this Forum (deepest apolgies for forgetting who, I suffer from CRS).
ChocLabWhaler posted 06-26-2002 01:20 PM ET (US)     Profile for ChocLabWhaler  Send Email to ChocLabWhaler     
Email on its way. Thanks for your help.
CLW
Ed Z posted 06-30-2002 08:19 PM ET (US)     Profile for Ed Z  Send Email to Ed Z     
Sorry bout not responding back Choclab... Yeah, I did get the plans emailed to me... Even got the center console plans too... I can email em to you if you are still in need...
ChocLabWhaler posted 06-30-2002 10:20 PM ET (US)     Profile for ChocLabWhaler  Send Email to ChocLabWhaler     
Yes, thank you. Email sent.
CLW
dhueske posted 07-01-2002 10:10 PM ET (US)     Profile for dhueske  Send Email to dhueske     
Whaler proud,
Could you send me a set of those stern seat plans?
Thanks! hueske@mindspring.com
thistle posted 07-02-2002 03:22 AM ET (US)     Profile for thistle  Send Email to thistle     
I am entertaing the stupid thought of fabricating from Honduras Mahogany plywood and Honduras Mahogany board stock, a center console and seats. These would be based upon the original BW plans tendered by Mr. Kincaid(Thank you).

I need to do this for my own Sakonnet and thought there may be a need for the "kit".

A friend has "volunteered" to run the parts on his wood shops CNC. I am waiting for a materials list and lumber quote before continuing. $? Probably cost plus. This isn't an enterprise.

Any interest?

flint99 posted 07-02-2002 12:25 PM ET (US)     Profile for flint99  Send Email to flint99     
I would also like the plans for this.
TIA
James
Ed Z posted 07-08-2002 01:31 AM ET (US)     Profile for Ed Z  Send Email to Ed Z     
The kit idea sounds interesting... let us know what the final damage (cost) will be ...
smirkless posted 07-17-2002 12:40 PM ET (US)     Profile for smirkless  Send Email to smirkless     
I have just about completed a very extensive set of plans for the Sakonett RPS (reversable piolet seat). A new post for this will be placed by Monday, July 22nd. Look for it! Wait until that post to request copies.
Smirkless in Orlando
Ger posted 07-21-2002 06:21 PM ET (US)     Profile for Ger  Send Email to Ger     
May I also get the plans for the rear seat? Thanks!
Whaler Proud posted 07-26-2002 06:33 PM ET (US)     Profile for Whaler Proud  Send Email to Whaler Proud     
Smirkless: Can we still expect the post?
Thanks

WP

flyguy posted 07-27-2002 08:09 AM ET (US)     Profile for flyguy  Send Email to flyguy     
that sounds great...could you e-mail me the plans as well? thanks all...

flyermi@yahoo.com

smirkless posted 07-31-2002 12:56 PM ET (US)     Profile for smirkless  Send Email to smirkless     
Yes, I guess there is no such thing as perfection...

I'm going to throw a few last notes and dimensions on the drawings. They will be posted on Monday Aug. 5th.

Smirkless in Orlando

Post New Topic  Post Reply
Hop to:


Contact Us | RETURN to ContinuousWave Top Page

Powered by: Ultimate Bulletin Board, Freeware Version 2000
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.