Forum: WHALER
  ContinuousWave
  Whaler
  Moderated Discussion Areas
  ContinuousWave: Whaler Repairs/Mods
  Removing Rust Stains

Post New Topic  Post Reply
search | FAQ | profile | register | author help

Author Topic:   Removing Rust Stains
pamlico posted 05-27-2002 02:54 PM ET (US)   Profile for pamlico   Send Email to pamlico  
Friend of mine just finished installing a new 350ci in his boat. During the process he left one the old head gaskets laying on the deck. When he picked it up it left a rusty colored stain in the shape of the head gasket,....ha ha ha ha,...How can this be removed. Only thing I could think of was maybe StarBrite or wet sand it. Thanks to all who reply!!
Tom Byrum posted 05-27-2002 07:43 PM ET (US)     Profile for Tom Byrum  Send Email to Tom Byrum     
Get some Barkeepers Friend. Its an ajax type of scouring powder. Amazing the way it works on rust. Make a paste with a little water and let it set for 30 minutes. Then scrub it with a brush.

Post New Topic  Post Reply
Hop to:


Contact Us | RETURN to ContinuousWave Top Page

Powered by: Ultimate Bulletin Board, Freeware Version 2000
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.