Moderated Discussion Areas
ContinuousWave: Whaler Repairs/Mods
Hull ID numbers
|Author||Topic: Hull ID numbers|
posted 06-04-2002 04:51 PM ET (US)
Sent boat out for fiberglass repairs & new Awl-Grip paint.Would like to re-stencil hull #'s, does anyone know what size stencil & spacing to use? I remember ID #33482 but forgot to measure them before the boat was sent out.
posted 06-04-2002 05:12 PM ET (US)
I'd be glad to help but I don't know how. Should I take a digital pic with a ruler next to it? I'll do it or maybe call Whaler. Let me know if you want me to do it.
posted 06-08-2002 08:09 AM ET (US)
It would be most helpful if you could take a dig. pic. with a ruler next to it. I just can't remember were these 1", 7/8",or what? I plan on using regular stencils that are close to the original size to paint them back on. Your help is appreciated!
|Tom W Clark||
posted 06-08-2002 12:34 PM ET (US)
The stenciled numbers and letters are 1/2" tall. A five digit number like yours would occupy c. 2 5/8" of width.
posted 06-09-2002 10:58 PM ET (US)
Tom is right on..... I measured my numbers and they are 1/2" high and 3 1/4" wide as I have a six digit number (3B3096) for a 1978 hull... I measured five of these digits and they measured 2 5/8" wide.
posted 06-10-2002 08:10 PM ET (US)
Thank-you for the info. Tom W Clark & whalersman. I'll plan on re-stencilling the numbers 1/2" tall & 2-5/8" long for my 5 digit numbers. Once again many thanks to all here at the website & forum.
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.