Forum: WHALER
  ContinuousWave
  Whaler
  Moderated Discussion Areas
  ContinuousWave: Whaler Repairs/Mods
  transom stress

Post New Topic  Post Reply
search | FAQ | profile | register | author help

Author Topic:   transom stress
Clam Hound posted 06-11-2002 06:29 PM ET (US)   Profile for Clam Hound   Send Email to Clam Hound  
Will an outboard(mec 40 20") attached to a jack plate or brackets, create more stress on the transom ('69).
Tom W Clark posted 06-11-2002 09:06 PM ET (US)     Profile for Tom W Clark  Send Email to Tom W Clark     
Yes.
NEVER SCARED posted 06-12-2002 01:20 PM ET (US)     Profile for NEVER SCARED    
Clam Hound

Pick up a 20lb weight and hold it against hour chest. Now extend your arms and hold that weight straight out.

Taylor posted 06-12-2002 01:29 PM ET (US)     Profile for Taylor  Send Email to Taylor     
That's an unusually short answer from Tom :)

Clam Hound, maybe your question could be asked differently. The question could be... will it create to much stress?

Some specifics on the boat would help too. Is this a 1969 13'? There are a several of threads and some pictures in Cetecea dealing with the problems and solutions associated with putting a 20" engine on a 15" transom 13 footer. Is that why you are thinking jackplate/bracket?

Taylor posted 06-12-2002 01:36 PM ET (US)     Profile for Taylor  Send Email to Taylor     
Here is the tread I was thinking of regarding different solutions to the 20" shaft on a pre 1972 13' whaler:

http://continuouswave.com/ubb/Forum3/HTML/002097.html

Clam Hound posted 06-13-2002 02:51 AM ET (US)     Profile for Clam Hound  Send Email to Clam Hound     
Taylor,

Thanks for the tread, answered some future questions.
The boat is a 1969 13' hull. Bought it 2 weeks ago for $700, with a trailer.
Thanks again.

Post New Topic  Post Reply
Hop to:


Contact Us | RETURN to ContinuousWave Top Page

Powered by: Ultimate Bulletin Board, Freeware Version 2000
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.