Forum: WHALER
  ContinuousWave
  Whaler
  Moderated Discussion Areas
  ContinuousWave: Whaler Repairs/Mods
  13 painting

Post New Topic  Post Reply
search | FAQ | profile | register | author help

Author Topic:   13 painting
familyg21 posted 06-18-2002 05:29 PM ET (US)   Profile for familyg21   Send Email to familyg21  
I HAVE BEEN PAINTING MY BOAT AND AM HAVING TROUBLE CNOTROLLING SOME OF THE DRIPPING MARKS. I IHAVE HAD TO SAND THE BOAT OVER AND TRY AGAIN
THANKS A MILLION
I AM USING INTERLUX WHITE EPOXY PAINT JUST CAN NOT SCONTROL THE DRIPPING
andygere posted 06-19-2002 02:30 AM ET (US)     Profile for andygere  Send Email to andygere     
Roll it on with a foam roller, and tip out the bubbles with a foam brush. Don't put too much paint on the roller, and expect to do 3-4 coats, wet sanded in between.

Post New Topic  Post Reply
Hop to:


Contact Us | RETURN to ContinuousWave Top Page

Powered by: Ultimate Bulletin Board, Freeware Version 2000
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.