Moderated Discussion Areas
  ContinuousWave: Whaler Repairs/Mods
  Here we go again...

Post New Topic  Post Reply
search | FAQ | profile | register | author help

Author Topic:   Here we go again...
Salmon Tub posted 07-15-2002 07:42 PM ET (US)   Profile for Salmon Tub   Send Email to Salmon Tub  
Just when I had thought I was done with Gel-coat repair for a while, I noticed the all around the cutout in the RPS back where you can store the small nick nacks, the gel coat has cracked. Looks like one of my passangers must have hit it too hard while the boat took a good wave. The glass looks pretty thin and flexible there and must have flexed a little too much for the gel coat to take. I am thinking that maybe I will be better off designing a new back out of Starboard. Never cared for the OEM seat back anyway, since it just doesn't seem to have been thought out well in the design process. I must say though, I do like the smell of fresh Gel-coat.

Post New Topic  Post Reply
Hop to:

Contact Us | RETURN to ContinuousWave Top Page

Powered by: Ultimate Bulletin Board, Freeware Version 2000
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.