Forum: WHALER
  ContinuousWave
  Whaler
  Moderated Discussion Areas
  ContinuousWave: Whaler Repairs/Mods
  Mercury Auto Blend Wiring

Post New Topic  Post Reply
search | FAQ | profile | register | author help

Author Topic:   Mercury Auto Blend Wiring
A Li Volsi posted 07-26-2002 03:07 PM ET (US)   Profile for A Li Volsi   Send Email to A Li Volsi  
I purchased an Auto Blend unit without the warning buzzer. It has three leads-one purple, one white, one black. The white and black have crimp on terminals for a battery connection, the purple has a plug connector. Anyone have an idea how this unit is wired?
Clark Roberts posted 07-26-2002 06:28 PM ET (US)     Profile for Clark Roberts  Send Email to Clark Roberts     
All the Merc "auto blend" units I have seen are actuated by fuel pump pulses in the fuel suction line. No elec. required to operate and those wires must be for a tank level sensor and/or no flow alarm.... puzzling?

Post New Topic  Post Reply
Hop to:


Contact Us | RETURN to ContinuousWave Top Page

Powered by: Ultimate Bulletin Board, Freeware Version 2000
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.