Forum: WHALER
  ContinuousWave
  Whaler
  Moderated Discussion Areas
  ContinuousWave: Whaler Repairs/Mods
  what to fabricate a T-top for Montauk

Post New Topic  Post Reply
search | FAQ | profile | register | author help

Author Topic:   what to fabricate a T-top for Montauk
cik posted 08-24-2002 05:31 AM ET (US)   Profile for cik   Send Email to cik  
Did anyone custom build a t-top for a Montauk? Any suggestions would be appreciated.
kamml posted 08-25-2002 10:51 AM ET (US)     Profile for kamml  Send Email to kamml     
Most folks on this board agree that a Montauk T-Top effects the boats center of gravity and could be very hazardous in a bad beam sea. Plus the t-top would probably just get in the way when fishing off either end. The Outrage 17-18 have a lot lower center of gravity with the below the floor mounted fuel tank and thus have more hull deeper in the water. I would recommend sticking to a Bimini, mount it on a 2' track so you can push it forward of the front railing when you need the room for fishing. Ken
Whaler Proud posted 08-25-2002 07:52 PM ET (US)     Profile for Whaler Proud  Send Email to Whaler Proud     
I'll take the lead on re-phrasing the question; Has anyone fabricated their own bimini top for a Montauk or Nauset?
cik posted 08-27-2002 02:31 PM ET (US)     Profile for cik  Send Email to cik     
Thanks for the reply, I'll be in the market to purchase a new bimini top.

Post New Topic  Post Reply
Hop to:


Contact Us | RETURN to ContinuousWave Top Page

Powered by: Ultimate Bulletin Board, Freeware Version 2000
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.