Forum: WHALER
  ContinuousWave
  Whaler
  Moderated Discussion Areas
  ContinuousWave: Whaler Repairs/Mods
  Capacity plate location on 13'

Post New Topic  Post Reply
search | FAQ | profile | register | author help

Author Topic:   Capacity plate location on 13'
DaveNJ posted 09-07-2002 12:30 PM ET (US)   Profile for DaveNJ   Send Email to DaveNJ  
where is the capacity plate to be located for a restore of a 1960's 13' sport ?

thanks,
Dave

jkh posted 09-07-2002 10:43 PM ET (US)     Profile for jkh  Send Email to jkh     
The original label on my 1967 13' was on the transom interior. It was a thin metal tape type material. On my newer 15' it is located on the port side interior at about mid-lenght. I haven't tried to put a new one my old 13' but I wouldn't think it would matter.

Post New Topic  Post Reply
Hop to:


Contact Us | RETURN to ContinuousWave Top Page

Powered by: Ultimate Bulletin Board, Freeware Version 2000
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.