Forum: WHALER
  ContinuousWave
  Whaler
  Moderated Discussion Areas
  ContinuousWave: Whaler Repairs/Mods
  Redo of 13' exterior

Post New Topic  Post Reply
search | FAQ | profile | register | author help

Author Topic:   Redo of 13' exterior
LiquidDiet posted 09-24-2002 05:48 PM ET (US)   Profile for LiquidDiet   Send Email to LiquidDiet  
I am about ready to redo the exterior of my 13'. I have to remove the old bottom paint and repair and smooth various small patches. Any suggestions on the type of finish everyone is using on their exteriors would be helpful
keltonkrew posted 09-24-2002 08:10 PM ET (US)     Profile for keltonkrew  Send Email to keltonkrew     
I'm getting ready to do the same thing. I'm going to sand off the bottom paint and re gel-coat the exterior. There is a post on "truck liner inside boat" or something like that. The post is mainly towards sanitred.

I'm thinking about applying sanitread to the interior as I'm not in this for a factory finish.

Good luck and send some pics. I would be interested. I'm starting mine in January

vdbgroup posted 09-24-2002 09:50 PM ET (US)     Profile for vdbgroup  Send Email to vdbgroup     
My 13' footer was re-gelcoated on interior and exterior. Non-skid was ground down since it could not be re-gelcoated. Mixed sand with gelcoat for super non-skid surface.

Post New Topic  Post Reply
Hop to:


Contact Us | RETURN to ContinuousWave Top Page

Powered by: Ultimate Bulletin Board, Freeware Version 2000
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.