ContinuousWave   Whaler   Moderated Discussion Areas   ContinuousWave: Whaler Repairs/Mods   console wood trim    search | FAQ | profile | register | author help

Author	Topic:   console wood trim
seasled	posted 09-25-2002 07:07 AM ET (US)         I want to refinish the trim and doors on my outrage19 console. Whats the best way to do that.
OutrageMan	posted 09-25-2002 07:23 AM ET (US)             Sand until the parts look like brand new wood. Apply 2-3 coats of a good teak oil like Amazon. Brian
Taylor	posted 09-25-2002 01:05 PM ET (US)             If you can unscrew and take the trim off the boat, and drag it inside with you over the winter you will find it much easier to sand and refinish. On balance I found that I saved time by taking it off.
bluewater	posted 09-25-2002 05:15 PM ET (US)             seasled- Got some paperwork from a fellow member. I will e-mail it to you. bluewater
Knockerjoe	posted 09-25-2002 07:37 PM ET (US)             Try a product called Cetol. it is maintenance free. i will never use teak oil again! take a look in the somewhere in the cetacea where there are pics of a boat that used cetol....joe

Hop to: ContinuousWave: The Whaler GAM or General AreaContinuousWave: Whaler MarketplaceContinuousWave: Whaler Repairs/ModsContinuousWave: Whaler PerformanceContinuousWave: Cetacea CommentsContinuousWave: Small Boat ElectricalContinuousWave: Trips and RendezvousContinuousWave: Post-Classic WhalersMETA-Discussion