Forum: WHALER
  ContinuousWave
  Whaler
  Moderated Discussion Areas
  ContinuousWave: Whaler Repairs/Mods
  Tilt/Trim with old morse control

Post New Topic  Post Reply
search | FAQ | profile | register | author help

Author Topic:   Tilt/Trim with old morse control
dhueske posted 09-28-2002 10:38 AM ET (US)   Profile for dhueske   Send Email to dhueske  
I'm planning on using my origional Morse control. There are'nt any provisions for tilt/trim on these so I was wondering how other people dealt with this problem.
whalersman posted 09-28-2002 01:02 PM ET (US)     Profile for whalersman  Send Email to whalersman     
Dash mounted Trim & Tilt Switches are available. I would try your engine dealer first.
Dick posted 09-28-2002 01:06 PM ET (US)     Profile for Dick  Send Email to Dick     
Any good quality momentary on/off/momentary on toggle switch will work fine.
andygere posted 09-28-2002 03:31 PM ET (US)     Profile for andygere  Send Email to andygere     
I have a dash mounted T/T switch. Be sure to locate it in an easy-to-reach spot near the throttle/shift.

Post New Topic  Post Reply
Hop to:


Contact Us | RETURN to ContinuousWave Top Page

Powered by: Ultimate Bulletin Board, Freeware Version 2000
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.