Author
|
Topic: bow light rewiring on '96 montauk
|
weekendwarrior |
posted 10-20-2002 09:15 PM ET (US)
I've got a 1996 17' montauk and to make a long story short the light which powers the bow light was cut off at the back of the boat almost flush with the side of the boat. I have spliced on a piece of wire but it's a temp fix, I would like to run a completely new wire from the bow light to the back of the boat. Does anyone know how to do this? It looks like the wire goes through the foam and I don't know how to snake a new wire through.
|
Dick
|
posted 10-20-2002 09:58 PM ET (US)
The wires run under the rubrail, pull it off and you can run the new wires. |