Forum: WHALER
  ContinuousWave
  Whaler
  Moderated Discussion Areas
  ContinuousWave: Whaler Repairs/Mods
  homemade trailer

Post New Topic  Post Reply
search | FAQ | profile | register | author help

Author Topic:   homemade trailer
Ian posted 11-11-2002 07:05 AM ET (US)   Profile for Ian   Send Email to Ian  
Does anyone have a simple plan for building a trailer for a montauk? I only have to move the boat a few hundred yards and not on public roads. Any ideas??
lonestarpa posted 11-11-2002 07:26 AM ET (US)     Profile for lonestarpa  Send Email to lonestarpa     
Ian, back in the late 50's early 60's (when people still made things themselves) Popular Science had published plans for a boat trailor built of construction lumber. Now with wolmanized lumber on the scene this would be a good canditate for a situation like your's.... the hitch area would need some serious design for strength, and would be a good place for steel.
Ian posted 11-11-2002 07:36 AM ET (US)     Profile for Ian  Send Email to Ian     
Do you have the plans????
Montauk posted 11-11-2002 10:17 AM ET (US)     Profile for Montauk  Send Email to Montauk     
Ian,
Monetarily you would be better off buying a used trailer for $300-$400. By the time you purchase all the materials, an axle and tires, you will have that much in it anyway. Spend the time you save on building it boating or fishing!
Barry posted 11-11-2002 10:44 AM ET (US)     Profile for Barry  Send Email to Barry     
Try http://www.glen-l.com/designs/desntrlr.html
DaveNJ posted 11-11-2002 11:39 AM ET (US)     Profile for DaveNJ  Send Email to DaveNJ     
I agree with Montauk. Plus, you may not be able to get a homemade registered in your state.
Be careful !
shoctor posted 11-12-2002 10:58 AM ET (US)     Profile for shoctor  Send Email to shoctor     
I agree go the used route even if the trailer you buy costs more than the price of a homemade trailer if and when you go to resell the boat even if the trailer is shot still adds value and appeal to the package.
bsmotril posted 11-12-2002 11:17 AM ET (US)     Profile for bsmotril  Send Email to bsmotril     
When faced with a similar problem, I took an old truck rear axle and built a wooden cradle on top of the leaf springs. Center the boat's weight on the cradle, and a couple of people can puch it to where it needs to go. The leaf springs were still attached to the axle. We used a nylon gunwale strap to hold the boat to the contraption. You could also rent one of those $20 dollar a day utility trailers and slide the boat onto the wooden bed. I'd put the rear end in first and let the bow hang out as the typical trailer is 10-14' long.
BillS
JBCornwell posted 11-12-2002 11:51 AM ET (US)     Profile for JBCornwell  Send Email to JBCornwell     
Where are you, Ian?

I have a couple of trailers that would be suitable for a Montauk for storage and short hauls. West-central Texas.

Red sky at night. . .
JB

Ian posted 11-20-2002 10:10 AM ET (US)     Profile for Ian  Send Email to Ian     
I am in Nova Scotia. I think it is a bit far to travel!

Post New Topic  Post Reply
Hop to:


Contact Us | RETURN to ContinuousWave Top Page

Powered by: Ultimate Bulletin Board, Freeware Version 2000
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.