Forum: WHALER
  ContinuousWave
  Whaler
  Moderated Discussion Areas
  ContinuousWave: Whaler Repairs/Mods
  Seatback option for 15SS

Post New Topic  Post Reply
search | FAQ | profile | register | author help

Author Topic:   Seatback option for 15SS
jimithing posted 01-07-2003 11:39 AM ET (US)   Profile for jimithing   Send Email to jimithing  
Was wonder if there is a way to install a seat back on a 15SS. I would assume that the factory install will not work due to the SS wraparound railing.No room to mount it on the gunnels Anyone done a home grown version that has held up?
Tom W Clark posted 01-07-2003 11:44 AM ET (US)     Profile for Tom W Clark  Send Email to Tom W Clark     
jimithing,

I'm not sure what a 15SS is, but if you mean a Super Sport 15 then it already has a seat back. What exactly are you asking for?

jimithing posted 01-07-2003 11:53 AM ET (US)     Profile for jimithing  Send Email to jimithing     
once again...my ability today to clarify anything is abysmal.

It is a supersport but without the supersport interior, the wraparound railing is all that is left. Replaced the wood 3 years ago. Just want to install a seatback on the bench helm seat. Thanks

Tom W Clark posted 01-07-2003 11:55 AM ET (US)     Profile for Tom W Clark  Send Email to Tom W Clark     
You could use the seat back option from the Sport's. The wrap around rail would insert into the second Tee of your existing rail (there's a "hot dog" or 4" length of 3/4" tubingint here as a splice). This is how the wrap around rails are installed on the Sport models.

Or, you could build the seat back from the Super Sport.

Post New Topic  Post Reply
Hop to:


Contact Us | RETURN to ContinuousWave Top Page

Powered by: Ultimate Bulletin Board, Freeware Version 2000
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.