Moderated Discussion Areas
  ContinuousWave: Whaler Repairs/Mods
  dimensions needed for 13' SS

Post New Topic  Post Reply
search | FAQ | profile | register | author help

Author Topic:   dimensions needed for 13' SS
T_Bro posted 01-10-2003 01:50 PM ET (US)   Profile for T_Bro   Send Email to T_Bro  
I need to make a new cover for the anchor locker on a 1986 13' Super Sport and dont have the boat handy to measure what size of plywood I need. I am going to use a mahogany ply, with a mahogany cap on the edges. Can anyone help me out? I appreciate the assistance.



Jiles posted 01-11-2003 04:35 PM ET (US)     Profile for Jiles    
Hi T-Bro. I have a 1986 Sport and I made mine with these demensions: Looking at the cover while standing in the boat, I made mine 26 1/2" x 14 3/4". With these demensions, I have approximately 1/8" clearance on the sides and with the panel pushed all the way forward, it is flush with the vertical wall where the drain hole and rope connector is located. Hope this helps.

Post New Topic  Post Reply
Hop to:

Contact Us | RETURN to ContinuousWave Top Page

Powered by: Ultimate Bulletin Board, Freeware Version 2000
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.