Forum: WHALER
  ContinuousWave
  Whaler
  Moderated Discussion Areas
  ContinuousWave: Whaler Repairs/Mods
  Currituck wood plans

Post New Topic  Post Reply
search | FAQ | profile | register | author help

Author Topic:   Currituck wood plans
nvrtoomanyboats posted 01-21-2003 11:16 AM ET (US)   Profile for nvrtoomanyboats   Send Email to nvrtoomanyboats  
Anybody know where I can my hands on a detailed set of plans for a Currituck interior ?? I have checked the current drawings on the OEM sources, but there are no drawings for a Currituck.

I think it will be pretty simple to make but a set of plans would certainly save a lot of guess work.

Any advice is welcome.

Thanks,
Rich

shoctor posted 01-24-2003 10:46 PM ET (US)     Profile for shoctor  Send Email to shoctor     
After I thaw out here in NY would be more than happy to take measurements and send pics of mine. And suggestions to improve. Free of charge of course

Roscoe posted 01-25-2003 12:07 AM ET (US)     Profile for Roscoe  Send Email to Roscoe     
I have the 1976 Sport(Hull) ,but it has the 1975 Currituck Wood interior.Took me awhile to figure out what I had.I would asume that all is the same except for the front,as I have the bigger ancore storage lid, without that little step in front.Please Post if you find the exact drawing so as I can cross refef.Thankyou.
John
Roscoe posted 01-25-2003 12:10 AM ET (US)     Profile for Roscoe  Send Email to Roscoe     
Attached to Above: Is this the interior you have? If so I can send any measurements you would like.All if needed for Full restore.
Here is the Photo.
http://continuouswave.com/whaler/cetacea/images/currituckRamp512x264.jpeg
nvrtoomanyboats posted 01-27-2003 11:59 AM ET (US)     Profile for nvrtoomanyboats  Send Email to nvrtoomanyboats     
Shoctor / Roscoe,

Thanks for your replies. Yes I am in the midst of changing a hull from an Eastport to a Currituck for lake use.

Roscoe, the picture you posted is the interior I want to do, but I have nothing to go by except pictures. Would you have the ability to measure and make a set of rough plans of how this goes together.

Obviously the thwart seat is easy, but the console and side holddown peices will be trickier.

Anything you can do would be a great help. My numbers are as follows:

(781) 681-3517 phone
(781) 681-3507 fax

Thank very much for any help you can give.

Rich

Tom W Clark posted 01-27-2003 12:16 PM ET (US)     Profile for Tom W Clark  Send Email to Tom W Clark     
Rich,

You really ought to call Jack Graner (whalernut) who's boat is pictured on the page that Roscoe has linked to above. Jack was trying for the longest time to trade his Currituck interior for a Nauset interior. See: http://continuouswave.com/ubb/Forum2/HTML/001577.html

nvrtoomanyboats posted 01-27-2003 10:08 PM ET (US)     Profile for nvrtoomanyboats  Send Email to nvrtoomanyboats     
Tom,

Thanks for your reply. I have sent an e-mail to Whalernut to see what the status of his interior is.

Meantime if anyone can measure and diagram a Currituck interior for me I would greatly appreciate it.

Regards,
Rich

Post New Topic  Post Reply
Hop to:


Contact Us | RETURN to ContinuousWave Top Page

Powered by: Ultimate Bulletin Board, Freeware Version 2000
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.