where to buy a new lifting eye bolt for montauk

  ContinuousWave
  Whaler
  Moderated Discussion Areas
  ContinuousWave: Whaler Repairs/Mods
  where to buy a new lifting eye bolt for montauk

search | FAQ | profile | register | author help

Author Topic:   where to buy a new lifting eye bolt for montauk

ponzuboy posted 02-19-2003 05:06 PM ET (US)
now that I have been confirmed that the lifting eye bolt has a bend in it, where can I buy a new one? I have been to westmarine and only saw straight ones anyone have any idea where to buy one for a montauk?
triblet posted 02-19-2003 08:12 PM ET (US)
There is no lifting eye BOLT.
There are two "nuts" and a piece of "allthread"/
I think your allthread is the piece you are
talking about, and EVERYBODYS (except one)
was bent. So don't worry about it and put it
back. The inside of the end goes up.
If your really want a new one, see your
whaler dealer. If you have a problem with
your whaler dealer, find another whaler
dealer, or try http://www.mcmaster.com ,
which has SS all thread in lots of sizes.
But it will just bend.

Chuck
j_h_nimrod posted 02-24-2003 04:22 AM ET (US)
Just replaced the old allthread because it was in real bad shape. We cut a piece of 1/2"-13 stainless allthread and had to put a bend in it to get it to work. All in a days work. If it ain't broke don't fix it, and if it is make it better...

Hop to:

Contact Us | RETURN to ContinuousWave Top Page

Powered by: Ultimate Bulletin Board, Freeware Version 2000
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.

Author	Topic: where to buy a new lifting eye bolt for montauk
ponzuboy	posted 02-19-2003 05:06 PM ET (US) now that I have been confirmed that the lifting eye bolt has a bend in it, where can I buy a new one? I have been to westmarine and only saw straight ones anyone have any idea where to buy one for a montauk?
triblet	posted 02-19-2003 08:12 PM ET (US) There is no lifting eye BOLT. There are two "nuts" and a piece of "allthread"/ I think your allthread is the piece you are talking about, and EVERYBODYS (except one) was bent. So don't worry about it and put it back. The inside of the end goes up. If your really want a new one, see your whaler dealer. If you have a problem with your whaler dealer, find another whaler dealer, or try http://www.mcmaster.com , which has SS all thread in lots of sizes. But it will just bend. Chuck
j_h_nimrod	posted 02-24-2003 04:22 AM ET (US) Just replaced the old allthread because it was in real bad shape. We cut a piece of 1/2"-13 stainless allthread and had to put a bend in it to get it to work. All in a days work. If it ain't broke don't fix it, and if it is make it better...