Moderated Discussion Areas
  ContinuousWave: Whaler Repairs/Mods
  Leaning Post Mauntauk

Post New Topic  Post Reply
search | FAQ | profile | register | author help

Author Topic:   Leaning Post Mauntauk
VanWhaler posted 03-31-2003 02:51 PM ET (US)   Profile for VanWhaler   Send Email to VanWhaler  
Can someone urgently advise me what the dims should be for a leaning post on a 17 Mauntauk?

I am about to start a restoration and need to order the leaning post but am not near the boat to measure !

Many thanks

VanWhaler posted 04-01-2003 12:24 AM ET (US)     Profile for VanWhaler  Send Email to VanWhaler     
Come on guys - I need some Help!
Kurt Gett posted 04-01-2003 12:26 PM ET (US)     Profile for Kurt Gett  Send Email to Kurt Gett     
Kurt Gett posted 04-01-2003 12:30 PM ET (US)     Profile for Kurt Gett  Send Email to Kurt Gett     
Van Whaler, Are you putting in an aftermarket leaning post? I can tell you that the popular RPS made of teak often found on the montauk is 35 inches wide. The pivot rails that attach it to the seat frames extend beyond the teak portion by ~1.5 inches each side so the overall width is ~38 inches. Regards, Kurt

Post New Topic  Post Reply
Hop to:

Contact Us | RETURN to ContinuousWave Top Page

Powered by: Ultimate Bulletin Board, Freeware Version 2000
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.