Where to get new rub rail for 17 Montauk - Moderated Discussion Areas

  ContinuousWave
  Whaler
  Moderated Discussion Areas
  ContinuousWave: Whaler Repairs/Mods
  Where to get new rub rail for 17 Montauk

search | FAQ | profile | register | author help

Author Topic:   Where to get new rub rail for 17 Montauk

myback posted 04-13-2003 05:11 PM ET (US)
please email any info on where to get new black rub rail to myback_@hotmail.com
thanks....Jon
jimh posted 04-13-2003 11:13 PM ET (US)
Jon,
The purpose of the forum is to exchange in public information about classic Boston Whaler boats. Your solicitation to have responses emailed to you in private is not in keeping with the purpose of the forum. I strongly discourage such requests.
There is a great deal of information about rub rails contained in an article in the REFERENCE section. You need only to read it to acquire the information you seek.
--jimh
Moderator
http://continuouswave.com/whaler/reference/
myback posted 05-02-2003 01:31 PM ET (US)
Sorry. I'm not familiar with the rules of the forum...won't happen again....
Dick posted 05-02-2003 07:58 PM ET (US)

myback
You will have to go through a Whaler dealer.
Part #500-05005 is the 3 piece kit.
Part #500-05017 is the newer heavy duty kit.
Dick
myback posted 05-04-2003 09:10 PM ET (US)
thanks Dick
jimh posted 05-05-2003 09:02 AM ET (US)
Dick,
Thanks for posting those part numbers. I will add them to the Reference article.
--jimh
Dick posted 05-05-2003 09:21 PM ET (US)
jimh
I'll scan my parts sheet and e-mail it to you.
Dick
Tigger Too posted 05-05-2003 11:00 PM ET (US)
A couple of questions that I couldn't find the answers for in the reference article. What is the difference between the regular kit and the 'newer heavy duty' one. Can either one be easily installed on a 1988 Newport? Does any one know whether the black rubrail in these kits leaves marks. When I nestle up to my sailboat with my OEM rubrail, it leaves nasty black marks on the gelcoat. Thanks in advance for any help.
Dick posted 05-06-2003 09:16 PM ET (US)
The newer heavy duty rub rail is the same one as used on the CPD boats. It is black but I don't know if it will leave marks.
Dick
Whalerdan posted 05-07-2003 08:45 AM ET (US)
Is the replacement rail long enough to wrap around the stern of the boat and cover up the green line? Would the three piece unit allow this type of installation?
Dick posted 05-07-2003 03:53 PM ET (US)
The rub rail kits are long enough to exactly replace the original.
Dick
Dick posted 05-07-2003 11:26 PM ET (US)
jimh
I just e-mailed you 4 pages of accessory kits with part numbers.
Dick
greadyanneIII posted 07-01-2003 02:57 PM ET (US)
The local supplier of whaler stuff in Charleston is telling me that I can't put a new "heavy-duty" black rub rail on my 1980 montauk. Is this correct? He also encourages me not to attempt the rub-rail installation my-self.

Hop to:

Contact Us | RETURN to ContinuousWave Top Page

Powered by: Ultimate Bulletin Board, Freeware Version 2000
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.

Author	Topic: Where to get new rub rail for 17 Montauk
myback	posted 04-13-2003 05:11 PM ET (US) please email any info on where to get new black rub rail to myback_@hotmail.com thanks....Jon
jimh	posted 04-13-2003 11:13 PM ET (US) Jon, The purpose of the forum is to exchange in public information about classic Boston Whaler boats. Your solicitation to have responses emailed to you in private is not in keeping with the purpose of the forum. I strongly discourage such requests. There is a great deal of information about rub rails contained in an article in the REFERENCE section. You need only to read it to acquire the information you seek. --jimh Moderator http://continuouswave.com/whaler/reference/
myback	posted 05-02-2003 01:31 PM ET (US) Sorry. I'm not familiar with the rules of the forum...won't happen again....
Dick	posted 05-02-2003 07:58 PM ET (US) myback You will have to go through a Whaler dealer. Part #500-05005 is the 3 piece kit. Part #500-05017 is the newer heavy duty kit. Dick
myback	posted 05-04-2003 09:10 PM ET (US) thanks Dick
jimh	posted 05-05-2003 09:02 AM ET (US) Dick, Thanks for posting those part numbers. I will add them to the Reference article. --jimh
Dick	posted 05-05-2003 09:21 PM ET (US) jimh I'll scan my parts sheet and e-mail it to you. Dick
Tigger Too	posted 05-05-2003 11:00 PM ET (US) A couple of questions that I couldn't find the answers for in the reference article. What is the difference between the regular kit and the 'newer heavy duty' one. Can either one be easily installed on a 1988 Newport? Does any one know whether the black rubrail in these kits leaves marks. When I nestle up to my sailboat with my OEM rubrail, it leaves nasty black marks on the gelcoat. Thanks in advance for any help.
Dick	posted 05-06-2003 09:16 PM ET (US) The newer heavy duty rub rail is the same one as used on the CPD boats. It is black but I don't know if it will leave marks. Dick
Whalerdan	posted 05-07-2003 08:45 AM ET (US) Is the replacement rail long enough to wrap around the stern of the boat and cover up the green line? Would the three piece unit allow this type of installation?
Dick	posted 05-07-2003 03:53 PM ET (US) The rub rail kits are long enough to exactly replace the original. Dick
Dick	posted 05-07-2003 11:26 PM ET (US) jimh I just e-mailed you 4 pages of accessory kits with part numbers. Dick
greadyanneIII	posted 07-01-2003 02:57 PM ET (US) The local supplier of whaler stuff in Charleston is telling me that I can't put a new "heavy-duty" black rub rail on my 1980 montauk. Is this correct? He also encourages me not to attempt the rub-rail installation my-self.