ContinuousWave   Whaler   Moderated Discussion Areas   ContinuousWave: Whaler Repairs/Mods   Rub Rail Replacement    search | FAQ | profile | register | author help

Author	Topic:   Rub Rail Replacement
Austin Wood	posted 05-14-2003 06:57 PM ET (US)         I have recently purchased a 1988 13 ft that I am in the middle of completely restoring. I have a new replacement rub rail that I got from my local dealer. When installing the rail, does it stop where the sides meet the transom or continue around to the engine. I have seen it both ways. Which way was it when the boat was new? Thanks
Taylor	posted 05-14-2003 08:06 PM ET (US)             The black part continues around the corner onto transom a few inches and then is fastened with a screw and a finish washer. There is a really good picture in http://continuouswave.com/whaler/reference/rubRail.html
Taylor	posted 05-14-2003 08:08 PM ET (US)             Oh, and I see you are a new member here. Welcome.

Hop to: ContinuousWave: The Whaler GAM or General AreaContinuousWave: Whaler MarketplaceContinuousWave: Whaler Repairs/ModsContinuousWave: Whaler PerformanceContinuousWave: Cetacea CommentsContinuousWave: Small Boat ElectricalContinuousWave: Trips and RendezvousContinuousWave: Post-Classic WhalersMETA-Discussion