ContinuousWave   Whaler   Moderated Discussion Areas   ContinuousWave: Whaler Repairs/Mods   Yamaha 703 Remote Control Wiring    search | FAQ | profile | register | author help

Author	Topic:   Yamaha 703 Remote Control Wiring
dscarry	posted 05-25-2003 10:13 AM ET (US)         Does anyone have any information on the wiring of the 703 remote? The one I have is such a mess. Besides the 10 pin connector that comes out so do about 10 other wires that seem to have no connections. I'd love to get rid of these wires, but the manual (Clymer) really makes no mention of them. Does anyone have information as to what they are?
Kingsteven18	posted 05-26-2003 09:12 AM ET (US)             For guages that you don't have?
dscarry	posted 05-26-2003 11:07 AM ET (US)             Well, for anything.. I've got nothing (and will continue to have nothing) outside of the control box itself....
jimh	posted 05-26-2003 05:03 PM ET (US)             The wiring is shown in detail in the owners manual for the applicable engine. The drawing is quite small and hard to read, but it shows in detail all those little connection points where the gauges plug into the wiring harness. I have enlarged mine so that I could read it, otherwise you'll need a magnifying glass or 20/10 vision.
dscarry	posted 05-27-2003 06:07 PM ET (US)             I don't have the original owners manual... I have a 84 40hp yamaha... Can you fax me the wiring diagram? (954) 385-0401

Hop to: ContinuousWave: The Whaler GAM or General AreaContinuousWave: Whaler MarketplaceContinuousWave: Whaler Repairs/ModsContinuousWave: Whaler PerformanceContinuousWave: Cetacea CommentsContinuousWave: Small Boat ElectricalContinuousWave: Trips and RendezvousContinuousWave: Post-Classic WhalersMETA-Discussion