Forum: WHALER
  ContinuousWave
  Whaler
  Moderated Discussion Areas
  ContinuousWave: Whaler Repairs/Mods
  painting over gelcoat

Post New Topic  Post Reply
search | FAQ | profile | register | author help

Author Topic:   painting over gelcoat
Bertramp posted 06-05-2003 04:25 PM ET (US)   Profile for Bertramp   Send Email to Bertramp  
I bought a boat that lost an area of gelcoat that is approximately 1'x2'. It was "sanded" down to the grey filler putty that is used to eliminate the cloth weave look, but the area is smooth. The boat is going to be awlgripped. Can I just prime and paint ... or do I need to have it regelcoated first ?
awlgrip2 posted 06-05-2003 04:57 PM ET (US)     Profile for awlgrip2  Send Email to awlgrip2     
Prime well with 545-sand with 320- shoot it. Good Luck

Post New Topic  Post Reply
Hop to:


Contact Us | RETURN to ContinuousWave Top Page

Powered by: Ultimate Bulletin Board, Freeware Version 2000
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.