Forum: WHALER
  ContinuousWave
  Whaler
  Moderated Discussion Areas
  ContinuousWave: Whaler Repairs/Mods
  Internal Tank Ground - Help

Post New Topic  Post Reply
search | FAQ | profile | register | author help

Author Topic:   Internal Tank Ground - Help
SeaHag posted 06-06-2003 06:52 PM ET (US)   Profile for SeaHag   Send Email to SeaHag  
Boat: 1981 20' Outrage

Question: Where does the "green" ground wire for the internal tank attach to the fiil/nozzle area?

The eye on the end of the ground wire must have been corroded because when I removed the panel (that covers the hoses) the wire came with it.

I have looked all over the area, under the gunwale, near the fill area and there is no indicator. I am wondering if it ever was attached!


Thanks in advance!

lhg posted 06-06-2003 06:57 PM ET (US)     Profile for lhg    
With an eye terminal on the wire, it attaches to the underside of one of the three machine screws that hold the fill fitting in place.
SeaHag posted 06-06-2003 07:15 PM ET (US)     Profile for SeaHag  Send Email to SeaHag     
Thanks a ton Larry.

Post New Topic  Post Reply
Hop to:


Contact Us | RETURN to ContinuousWave Top Page

Powered by: Ultimate Bulletin Board, Freeware Version 2000
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.