Forum: WHALER
  ContinuousWave
  Whaler
  Moderated Discussion Areas
  ContinuousWave: Whaler Repairs/Mods
  How to restore RPS legs in 1 hour.

Post New Topic  Post Reply
search | FAQ | profile | register | author help

Author Topic:   How to restore RPS legs in 1 hour.
Bigshot posted 07-21-2003 01:49 PM ET (US)   Profile for Bigshot   Send Email to Bigshot  
Get a can of Penetrol and slop a cooat on them.....look BRAND NEW and they are 14 years old. Browner then a UPS truck, prettier then than a victoria's secret model, firmer too.

I am also going to do the non-skid with it. I have seen it before and the results are sweet. Just wears off and time to do it again from what I hear.....anyone tried it?

knothead posted 07-21-2003 02:32 PM ET (US)     Profile for knothead  Send Email to knothead     
bigshot,

I just finished using "Woody Wax" on the non-skid and RPS legs--the legs look great. The non-skid is now non non-skid. Had a great time wakeboarding,tubing, and sliding around on the inside of the boat Sunday.

I hope this stuff wears off. You might have the same results with Penetrol. I've only used it while painting so I don't know how slippery it'll be.

regards---knothead

Post New Topic  Post Reply
Hop to:


Contact Us | RETURN to ContinuousWave Top Page

Powered by: Ultimate Bulletin Board, Freeware Version 2000
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.