ContinuousWave   Whaler   Moderated Discussion Areas   ContinuousWave: Whaler Repairs/Mods   deck screws    search | FAQ | profile | register | author help

Author	Topic:   deck screws
SMLWhaler	posted 08-13-2003 03:16 PM ET (US)         I have a 1962 13'. I noticed, during the restoration process, there are screws about every 1.5" in a groove all the way around the decking. Is this factory? The blue gel coat is covering the screws so I assume it is.
WhalerGoFar	posted 08-13-2003 03:41 PM ET (US)             I assume you are talking about the rub rail? If not there were no screws installed by Whaler anywhere else. And they didn't use screws for the rub rail...the previous owner may have installed a aftermarket rubral with track. If your talking of somewere else on the boat please give more detail. Mike
lhg	posted 08-13-2003 03:49 PM ET (US)          There are no screws in the floor at all. Those markings are in the inner glass mold. No screws under them.

Hop to: ContinuousWave: The Whaler GAM or General AreaContinuousWave: Whaler MarketplaceContinuousWave: Whaler Repairs/ModsContinuousWave: Whaler PerformanceContinuousWave: Cetacea CommentsContinuousWave: Small Boat ElectricalContinuousWave: Trips and RendezvousContinuousWave: Post-Classic WhalersMETA-Discussion