ContinuousWave   Whaler   Moderated Discussion Areas   ContinuousWave: Whaler Repairs/Mods   Bimini top/cover    search | FAQ | profile | register | author help

Author	Topic:   Bimini top/cover
littledreamer	posted 09-03-2003 08:20 PM ET (US)         I have a three piece cover that came with my 1984 22" Outrage. Does anyone have a picture of what it looks like installed. I thought I was a pretty intelligent guy..but this thing has me stumped???? I got the front on, but I can't get the other two pieces. Thanks, Eric
fina	posted 09-03-2003 08:27 PM ET (US)             when someone sends you those pictures, please forward them to me. thanks
kingfish	posted 09-03-2003 08:52 PM ET (US)             I can't tell from your post if you are describing a mooring cover, or parts of a running weather set, if the parts are from Mills Canvas, or what- To see what some of the parts of a Mills running weather set look like installed and flying, go to my website listed in my profile. Don't know if that is where you are or not though... kf
littledreamer	posted 09-03-2003 09:24 PM ET (US)             It is Mills Canvas and it is a running weather set. The pieces appear to zip together, but I don't know if they are to used at the same time? Thanks, Eric
kingfish	posted 09-03-2003 09:36 PM ET (US)             Then I think you will benefit from looking at a couple of the photos on my website, mentioned above. There are shots of the forward shelter, flying top, windshield and side curtains on the opening page and fun photos page, and a shot of the whole enchilada (with rear curtain) on the technical page...or in some order similar to that... kf
kingfish	posted 09-04-2003 10:41 AM ET (US)             I didn't think of it sooner, but I have Mills installation diagrams for the weather set on an Outrage 22 scanned in; let me know if it would be helpful to you if I e-mailed them. kf
littledreamer	posted 09-04-2003 01:42 PM ET (US)             Kingfish, I would really appreciate it if you emailed them to me at the address in my profile. Much thanks, Eric
kingfish	posted 09-07-2003 01:42 PM ET (US)             Eric- Did you get the scans I sent and did they help you out? John
littledreamer	posted 09-07-2003 08:18 PM ET (US)             KF I did get them. Thanks alot! I also spoke with Mills. I think the prior owner "tweaked" the top somehow. It is Mills canvas(has their label)but Mills didn't recognize the configuuration. May be time for a new one. Much thanks, Eric

Hop to: ContinuousWave: The Whaler GAM or General AreaContinuousWave: Whaler MarketplaceContinuousWave: Whaler Repairs/ModsContinuousWave: Whaler PerformanceContinuousWave: Cetacea CommentsContinuousWave: Small Boat ElectricalContinuousWave: Trips and RendezvousContinuousWave: Post-Classic WhalersMETA-Discussion