ContinuousWave   Whaler   Moderated Discussion Areas   ContinuousWave: Whaler Repairs/Mods   Help With Casting Seat Mount, So. Cal    search | FAQ | profile | register | author help

Author	Topic:   Help With Casting Seat Mount, So. Cal
quickfarms	posted 09-29-2003 08:46 PM ET (US)         I would like to measure an existing bracket. Does anyone located in the L.A. or the Orange County area have one, loose or on a whaler, that I could measure so that I could make up drawings and produce a copy of this seat mount. Based on the post the bracket is not available from the manufacturer or whaler at this time.
quickfarms	posted 09-30-2003 01:19 PM ET (US)             Can you help me?
quickfarms	posted 10-02-2003 07:57 PM ET (US)             bump
Rick Dewees	posted 10-02-2003 08:56 PM ET (US)             Check email. Rick
Steve Leone	posted 10-03-2003 01:05 AM ET (US)             I have a pair I am about to list on Ebay. They are from an rps. Thet are in good condition. Steve
ratherwhalering	posted 10-03-2003 02:01 PM ET (US)             I have one installed in my Montauk, but I'm up in the SF bay area. The shims and backing plate look easy enough to fabricate, but the seat mount will be tough. E-mail me if you are up in the area, and I'll arrange a time for you to come take a look.

Hop to: ContinuousWave: The Whaler GAM or General AreaContinuousWave: Whaler MarketplaceContinuousWave: Whaler Repairs/ModsContinuousWave: Whaler PerformanceContinuousWave: Cetacea CommentsContinuousWave: Small Boat ElectricalContinuousWave: Trips and RendezvousContinuousWave: Post-Classic WhalersMETA-Discussion