Forum: WHALER
  ContinuousWave
  Whaler
  Moderated Discussion Areas
  ContinuousWave: Whaler Repairs/Mods
  Twin 15hps on a 13'

Post New Topic  Post Reply
search | FAQ | profile | register | author help

Author Topic:   Twin 15hps on a 13'
SMLWhaler posted 10-10-2003 10:12 AM ET (US)   Profile for SMLWhaler   Send Email to SMLWhaler  
Has anybody ever attempted to mount twins on a 13'? I've thought about doing this but don't know if its feasable. Any input is appreciated.
Bigshot posted 10-10-2003 11:21 AM ET (US)     Profile for Bigshot  Send Email to Bigshot     
Sure! throttle setup is gonna be a bitch though.
f14bombcat posted 10-11-2003 09:05 PM ET (US)     Profile for f14bombcat  Send Email to f14bombcat     
Hmmm, sounds like fun
hooter posted 10-11-2003 10:53 PM ET (US)     Profile for hooter    
Why not just get you a bracket and mount three 10 h.p.'s on the back o'that puppy? Should all fit back there and make 1-1/2 times as much sense as the twins:-!
NausetBoy posted 10-12-2003 09:08 PM ET (US)     Profile for NausetBoy  Send Email to NausetBoy     
I had twin 9.9s on a small wooden skiff. Throttle was kind of hard but when I finished it was well worth it. Turns lots of heads and is pretty basic just takes some time.
ryanwhaler posted 10-12-2003 09:29 PM ET (US)     Profile for ryanwhaler  Send Email to ryanwhaler     
Nausetboy,

How did you rig the throttle? I just can't picture how it would be done.

Gene in NC posted 10-12-2003 10:45 PM ET (US)     Profile for Gene in NC  Send Email to Gene in NC     
Hooter, you're bad. Biggest chuckle yet on this board. Mebbe too many ice cubes tonight but I can't think about the triples w/o breaking up.
SMLWhaler posted 10-13-2003 10:17 AM ET (US)     Profile for SMLWhaler  Send Email to SMLWhaler     
Hooter

Nice to know there is someone out there who really enjoys sharing their sarcasm with everyone. You go boy!!

Bigshot posted 10-13-2003 10:55 AM ET (US)     Profile for Bigshot  Send Email to Bigshot     
Hell, why not 10 4's. Actually I have 2 4.5 OMC's in my barn that I plan on rigging one day on something, still trying to figure out the throttle.
NausetBoy posted 10-13-2003 05:40 PM ET (US)     Profile for NausetBoy  Send Email to NausetBoy     
Well on one side of the engine, there are pop out holes where I can hook up a throttle, I bought a kit that they have at a dealership for hooking up throttles on small motors. I just bought two kits and hooked the cables up to a 704 throttle and the steering is easy.

Post New Topic  Post Reply
Hop to:


Contact Us | RETURN to ContinuousWave Top Page

Powered by: Ultimate Bulletin Board, Freeware Version 2000
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.