ContinuousWave   Whaler   Moderated Discussion Areas   ContinuousWave: Whaler Repairs/Mods   interlux paint on my console?    search | FAQ | profile | register | author help

Author	Topic:   interlux paint on my console?
tgrobson	posted 01-25-2004 09:35 PM ET (US)         After completely stripping all of the wood from my console nad refinishing it, I realized that my console needed a redo as well. I have completely sanded my console, and am thinking of using Brightside to repaint. Has anyone used this product, and is hatteras off white a match for an 88 outrage? Also, what is a good method of filling where necessary?
JayR	posted 01-26-2004 02:02 PM ET (US)             I would suggest that you use the Interthane Plus made by Interlux. It is a two part epoxy paint and can be brush applied with spray like results. The relaxing agent used for the brushing application is great stuff (2333n I believe it is labeled) just be certain to maintain a wet edge and do not got back to touch it up. Any fairing compound will suffice to fill nicks and scratches. For large holes and gouges, I used the West System Epoxy and mixed in the "micro-beads' to get the consistency that I needed.

Hop to: ContinuousWave: The Whaler GAM or General AreaContinuousWave: Whaler MarketplaceContinuousWave: Whaler Repairs/ModsContinuousWave: Whaler PerformanceContinuousWave: Cetacea CommentsContinuousWave: Small Boat ElectricalContinuousWave: Trips and RendezvousContinuousWave: Post-Classic WhalersMETA-Discussion